For optimal performance, install identical drives of the same model and capacity when creating a disk array. A u t o – loads the optimal settings for the system. If an item is user- configurable, you can change the value of the field opposite the item. To change the supervisor password, follow the same steps as in setting a user password. A configurable field is enclosed in brackets, and is highlighted when selected.
|Date Added:||6 June 2009|
|File Size:||23.99 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Discard Changes This option allows you to discard the selections you made and restore the previously saved values.
If this happens, revert to the default setting. These connectors are set to Standard IDE configuration by default.
The configuration options vary depending on the CPU installed. The default [Auto] automatically selects the fan speed ratio when operating a low CPU temperature. Do either one of the following to create a bootable ethednet disk. Write the BIOS filename on a piece of paper. The available values range from 8 KB to KB. Do not forget to connect the fan cables to the fan connectors.
ASUS Q- Fan technology intelligently adjusts fan speeds according to system loading to ensure quiet, cool and efficient operation. The new drive must be of the same size or larger than the existing drive.
This port connects the rear speakers on a 4-channel, 6-channel, or 8-channel audio configuration.
Refer to the ASUS contact information. When set to Auto, the data transfer from and to the device occurs multiple sectors at a time if the device supports multi-sector transfer feature.
Main menu items 2. To use the Hyper-Threading Technology on this motherboard: Select the option 3.
Secure the card to the chassis with the screw you removed earlier. The figure shows a graphics card installed on the PCI Express x16 slot.
When set to Power On, the system goes on after an AC power loss. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. At the DOS prompt, type format A: See details on page Failure to do so can cause you physical injury and damage motherboard components.
This pin port connects a parallel printer, a scanner, or other devices. A configurable field is enclosed in brackets, and is highlighted when selected. Yukonn the jumper caps gigbait when you intend to yuon the chassis intrusion detection feature. Chipset Core Voltage [Auto] Allows selection of the chipset core voltage.
The default selection is KB. Click S t a r tt, then select R u n n.
When you select this option, a confirmation window appears. Place the heatsink on top of the installed CPU, making sure that the four pins match the holes on the motherboard.
The utility then updates the corrupted BIOS file. See page for details. Always update the utility to avail all its features. Thus, connection cannot be made on the first try.